Water Softeners

Professional Softener Models:

• RPS30K – 30,000 grain (1 cu ft)
• RPS45K – 45,000 grain (1.5 cu ft)

Both models include salt tank (21”W x 21”D x 36” H), by-pass valve, 10’ drain tubing and automatic bilingual electronic metered control valve. Salt not included

Features:

• On-Demand Regeneration: Built-in water meter counts the gallons of water used and regenerates only when needed
• Touch-Screen Electronic Display: Easy to program and change multiple settings including water hardness, time of regeneration, time of each regeneration cycle and many other features
• Salt Saving Technology: The electronic display allows you to control how much salt you want to use. While these are factory programmed for 6 lbs/cu ft, you can change this to lower or higher settings, depending on your water quality
• 2-Tank System: A separate large brine tank provides easier access for salt filling as well as easier service should the salt get bridged
• Soft Water Recharge for High Usage: If capacity is reached before it is time to regenerate, the softener will do a quick regeneration to restore limited capacity to get it through the remainder of the day
• System Refresh: Automatically performs a 10 minute backwash after 7 days of inactivity to keep system fresh and prevent microbial growth
• Adjustable Backwash: Saves significant amount of water by skipping backwash for up to 10 regenerations on clean municipal water supply
• Scrolling Diagnostics: Automatically begins scrolling important information for diagnostic purposes when button pressed
• Soft Water Brine Tank Refill: Conserves capacity and keeps brine tank cleaner by adding only treated soft water to brine tank rather than raw untreated hard water.
• 10-year limited warranty
• Not for use with hot water or in multi-storey buildings over 3 storeys

Available at:

Model : RPS30K

• Capacity = 30,000 grains
• Resin volume = 1.0 cu ft
• Flow rate = 5.0 GPM (10.0 GPM max)
• Tank size = 9″ dia x 48″ H
• Inlet/outlet = 3/4″ MPT
• Shipping weight = 105 lb (48 Kg)

Model : RPS45K

• Capacity = 45,000 grains
• Resin volume = 1.5 cu ft
• Flow rate = 7.5 GPM (15.0 GPM max)
• Tank size = 10″ dia x 54″ H
• Inlet/outlet = 3/4″ MPT
• Shipping weight = 135 lb (61 Kg)

Download PDF spec sheet :

Coming soon

Download PDF product manual

Coming soon